1/10 Scale Foam for 10mm & 11mm Carburetors (3) Part No. 10FM

• Fit 1/10 scale air filters for 10mm and 11mm carburetors: 10ST, 1045, 1060, S1045, S1060, 11ST, 1145 and S1145
• Pack of 3
• Comes pre-oiled

NOTE: Does not fit 1516ST or JTST use 8ONFM

• Replacement cap for RT80 and 15169L
• Optional extended neck cap for all other 'Large' Motor Savers 151661, 151691, SAV100 and TMX80

Regular Short Neck Cap   Part No. 8RCP

• Replacement cap for 151661, 151691, SAV100 and TMX80
• Optional cap for RT80 and 15169L

High-Impact Cap for 1/8 Scale Off-Road Air Filters Part No. 8OFCP

• Extra gripping power
• Cap won't come off even with high impact and rollovers
• Replacement cap for 151660, 151690, RT60, SAV90 and TMX60
• Optional cap for 1516ST and JTST

Note: You may shorten the legs 1/8" for easier removal on on-road air filters

Cap for 1/10 Scale with 10 & 11mm Carburetors  Part No. 10CP

• Replacement cap for 1/0 scale air filter with 10mm or 11mm carburetors:
  10ST, 1045, 1060, S1045, S1060, 11ST, 1145 , 1160 and S1145

Note: Does not fit JTST or 1516ST use 8OFCP

Super Duty Cap - Dust / Mud / Rain Deflector  Part No. MS0215

• Super duty cap helps deflect mud, dirt and rain for going directly into the air filter
• Has a bit of noise reduction
• Replacement cap for S1045, S1060 and S1145
• Optional cap for 1/10 scale RC air filters for 10mm and 11mm carburetors:
  10ST, 1045, 1060, 11ST, 1145 and 1160

Base Kit Assortment for 15mm - 16mm Carbs  Part No. BS1516

Fits new and previous 1/8 scale off-road RC air filters.

Includes (shown left to right):

• 90 Degree base, fits most 1/8 carbs
• 60 Degree base, fits 2.5 / 3.3 Revo, T-maxx and most truck carbs
• 60 Degree base, fits HPI truck carb

90° Base for 15mm - 16mm Carburetors  Part No. BS1516-1

• Fits new and previous 1/8 scale off-road RC air filters and most 1/8 scale carbs.
• Replacement base for 151690, 151691 and 15169L.

60 Degree Base for 15mm - 16mm Carburetors  Part No. BS1516-2

• Fits 2.5 / 3.3 Traxxas Revo, T-Maxx, Slayer and most truck carbs.
• Replacement base for 151660, 151661, RT60, RT80 and TMX60.
• Can be left long for extra reach, or shortened for a tighter fit.

60 Degree Base for 15mm - 16mm Carburetors  Part No. BS1516-3

• Fits HPI truck carb and most truck carbs
• Replacement base for SAV100, SAV90 and TMX80

10mm Base Kit Assortment  Part No. BS10

• Quick change base for different angles and sizes.
• Includes one 10mm straight base, 45 degree base and 60 degree long base
• Replacement base kit for 10ST, 1045, 1060, S1045 and S1060

11mm Base Kit Assortment  Part No. BS11

• Quick change base for different angles and sizes.
• Includes one 11mm straight base, 45 degree base and 60 degree long base
• Replacement base kit for 11ST, 1145, 1160 and S1145

Body Clips - Pack of 12  Part No. BC12

• Fits 3/16" to 1/4" shafts (4.76mm to 6.35mm)
• 1" length (24mm)
• Pack of 12