| Keep your engine running strong; always use tie straps around carburetor base and filter base. |
After twenty tanks of gas carburetor was checked for any dirt. Foam was cut open and checked for dirt penetration. There was absolutely no dirt penetrated into foam past 1/4 inch and no dirt in carburetor with q-tip test. This test was done in a field with clouds of fine dirt when running in an oval pattern. After the test the engine ran at normal temp and idled perfectly. Motor Saver cleaning instructions: Keep checking every two tanks of gas until 1/8 inch dirt penetration is found on the inside foam. This will tell you about how many tanks you can go before cleaning.
| Part Number TMXFM, Package of two white pre-oiled inside foam elements |
| Part Number B8FFM, Package of one outside black unoiled foam element and one pre-oiled inside white foam element. Outer black foam element for heavy dust conditions. |